AW Systems » Storage & Handling » Wire Partitions » Woven Wire Specifications

Woven Wire Specifications

Military Woven Wire Partitions

WireCrafters military grade lockers and cages, Corp of Engineers Approved

WireCrafters Standard 840 Woven Wire Mesh Partitions

Woven Wire Mesh -
Thickness of Wire: 10 ga (.135)
Design: 2” x 1” Rectangular Woven Wire

Woven Wire Mesh Panels -
Frame: 1-1/4” x 1-1/4” x 1/8” Angle
Fabrication: Mesh is securely welded to frame with flat steel stiffeners welded to frame behind mesh panels longer than 3’ 6”

Woven Wire Mesh Doors -
Frame: 1-1/4” x 1-1/4” x 1/8” Angle
Fabrication: Mesh is securely welded to frame with flat steel stiffeners welded to frame for extra strength where needed.

Upright Posts -
Material: 2” x 2” x 14ga. square tubing
Fabrication: 1/4” x 2” x 7” plate welded at base of post

Hardware -
Material: 3/8” standard thread grade two plated for panel connections. Door hardware shall be 1/4” x 1” self drilling screws. 3/8” floor anchors and all other hardware furnished as needed.

Military Wire Partitions Finish -
Nonplated parts shall receive one prime coat of gray alkyd enamel electrostatically applied. Product is finished for interior applications.

Warranty Five (5) years. Consult specific warranty statement.